Classic Line

DC single direction shiftlock solenoids are the universal and cost-effective answer for precision engineering and industrial applications as well as for locking systems.

The solenoids can be installed in any position. Push or pull actuation is possible. However, the force transfer should be in the axial direction only; lateral loads increase the wear on the bearings.

Information on the life span and switching frequency on consultation with the manufacturer.

The application of an electromagnetic force brings about a linear movement from the initial position to the end position. The return movement is accomplished by external forces or optional by integration of a return spring. The standard devices are not equipped with a stroke limitation.

The magnetic forces indicated are reached at 90% of the nominal voltage and in warmed up condition. The values for the switching times are valid for nominal voltage, warmed up condition and load with 70% of the magnetic force of the device.

The products are manufactured and tested according to DIN VDE 0580/07.2000.

Nominal voltage: 24 V DC

Duty cycle: 100%
The relative duty cycle refers to a maximum length of execution of 5 minutes.

Protection class: according to IEC 60529.

Thermal classes: B, E and F.

Changes of design are subject to change.

Downloads
Catalog-Classic-Line