Control Power Line

Short strokes, high magnetic forces, precise switching, perfect dynamics – those are the advantages of this series of solenoids.
They are preferably incorporated as holding modules in conveying systems, used as dry switching valve solenoids according to the field of application and are basically suitable for all kinds of locking requirements.

The application of an electromagnetic force brings about a linear movement from the initial position to the end position. The return movement is accomplished by external forces.
The solenoids can be installed in any position, but the force transfer should be in the axial direction only. Lateral loads increase the wear on the bearings.
The power transmission must be by carried out by a non-magnetizable stud.

The magnetic forces indicated are reached at 90% of the nominal voltage and in warmed up condition. The values for the switching times are valid for nominal voltage, warmed up condition and load with 70% of the magnetic force of the device.

With devices of protection class 1 the user must provide for the earth lead connection according to VDE 0100.

The products are manufactured and tested according to DIN VDE 0580/07.2000.

Nominal voltage: 24 V DC

Duty cycle: 100%

Protection class: according to IEC 60529.

Thermal class: B.

Changes of design are subject to change.

Downloads
Catalog-Control-Power-Line